Why is my Frigidaire refrigerator beeping? [REVEALED!]

It’s one of those nights when you can’t help but surrender to your midnight cravings. As you get out of bed to get more snacks, you hear faint beeping, growing louder as you inch closer to the kitchen.

Perhaps it’s the ungodly hour, but the eerie sound can be quite frightening, especially when no one else is around—or so you think. Although we do love a good horror story, this might turn out to be a funny one.

That strange beeping noise you’re hearing? Well, it might just be your Frigidaire refrigerator telling you that you left the door open during one of your late-night fridge raids.

So you know why your appliance is beeping, we’ll delve into the different alarms on your Frigidaire refrigerator. We will also show you how to reset each one. 

Why is my Frigidaire refrigerator beeping?

If a Frigidaire refrigerator is beeping, it’s most likely because the door has been left ajar for over 5 minutes. The beeps warn you about changes in the appliance or issues that need to be resolved.

Other issues that trigger beeping include power failure, blocked ice chutes, and high temperatures.

Here are a few quick fixes to help you troubleshoot the problem.

• Confirm that the fridge door is closed. 

If the door isn’t closing properly, check the seals for obstructions, dirt build-up, or signs of damage. Troubleshoot it, if necessary.

• Reset the alarm(where is the reset button on frigidaire refrigerator). 

Just unplug the fridge’s power cord and let the electrical charge clear out of the unit. Then, restore power after 10 to 15 minutes.

If the issue persists, identify the code on the display and reset the alarm. Keep reading our guide for step-by-step instructions.

How to Stop a Beeping Frigidaire Refrigerator

To stop a beeping Frigidaire fridge, check the error code and identify the alarm. Some alarms can be muted by pressing Mute Alarm or the Set button, while others turn off automatically.

Depending on the alarm, additional troubleshooting might be necessary to resolve the problem and stop the beeping.

Here’s a quick overview of your Frigidaire fridge’s alarms and how to reset them.

Causes	Solutions
Open Door	• Push the Set button to reset the Door Ajar alarm.
Power Failure	• Check your user manual for instructions specific to your fridge model. • Press the Mute Alarm or Default Settings button to reset the PF alarm. • If that doesn’t work, press the Options menu and select the PF alarm. Then, push the Set button to reset it.
Jammed Ice Chute	• Wait for the alarm to automatically reset after 2 minutes. • To do a manual reset, remove the jammed ice cube in the chute and press the Set button.
High Temperature in the Fridge/Freezer	• Press the Mute Alarm button.

Open Door

Leaving the Frigidaire fridge or freezer door open for more than 5 minutes will set off the Door Ajar alarm. Your unit will beep 5 times and display a corresponding error code, making it easier for you to identify the fault.

Solution: To reset the Door Ajar alarm on a Frigidaire refrigerator, close the door properly and press the Set button on the display.

If the alarm recurs after the reset, identify why the fridge door isn’t closing properly and perform the necessary repairs.

Here are the most common reasons why your door won’t close.

• The fridge is overloaded or disorganized.
• The shelves aren’t installed correctly.
• The door gaskets are dirty or damaged.

Overloaded or Disorganized Fridge

Are the door bins too full? If you stock the door bins with too many items, the door might not close properly due to the weight of its contents.

Food items can also extend way beyond the shelves if you don’t organize them properly or you overpack the shelves.

Solution: Arrange your fridge properly, placing food items in their designated shelves and bins. To prevent overloading, follow these tips:

• Keep the fridge ¾ full of food to avoid overloading and promote optimal cooling.
• Clean out the fridge every few weeks. Check the expiration dates on products that have been sitting on the shelves for a while—then get rid of them, if needed.
• Remove any unnecessary items that don’t need to be refrigerated, such as citrus fruits, hot sauces, potatoes, honey, and more.

Poor Installation of Fridge Shelves

If the shelves aren’t installed correctly after routine cleaning or maintenance, they can prevent the door from closing properly. 

Solution: Just remove the shelves and reinstall them properly. Check your user manual for detailed installment instructions for your fridge model.

Dirty Door Gaskets

The door gasket provides an airtight seal that prevents cool air from escaping the fridge and warm air from entering it. Without proper maintenance, dirt will start to accumulate on the gasket and hinder the door from closing.

Solution: We don’t recommend removing the door seals for cleaning. Just wipe the dirty gaskets with a mild cleaning product or a homemade vinegar solution.

• Step 1: Unplug the power cord, or turn off the circuit breaker. 
• Step 2: Open the fridge door.
• Step 3: Clean the gaskets with a soft cloth or an old toothbrush dipped in a 1:3 vinegar and water mixture.
• Step 4: Wipe the gaskets with a dry cloth. Or, open the fridge doors to let the gaskets airdry.
• Step 5: Close the doors and restore power once the gaskets are fully dry.

Damaged Door Gaskets

If your fridge’s door gasket is loose, torn, or worn out, the door will not close properly and the fridge won’t cool(frigidaire refrigerator not cooling). You must replace the gasket immediately or it will cause other issues, including a High Temp alarm.

A visual inspection is often enough to verify that the gasket is defective. However, some cracks and tears are difficult to spot so you either need to inspect it by hand or perform a dollar bill test.

To test the seal, close the fridge door on a single dollar bill or a piece of paper, then, carefully pull it out. If you don’t feel any resistance when you pull the bill out, the gasket needs to be replaced.

Solution: Prep the new door gasket for installation by taking it out of the package and laying it flat on a surface. Leave the rubber seal for 1-2 days to remove any kinks and creases.

To install the new gasket, follow these steps:

• Step 1: Unplug the refrigerator and open the door.
• Step 2: Pull out the rubber gasket on the door, starting from the top corner of the fridge. Work your way around the door until the seal is fully removed.
• Step 3: Inspect the grooves where the gasket goes and wipe it clean, if necessary.
• Step 4: Position the new door seal over the shelving. Push the gasket into the channel, starting from the top corner again.
• Step 5: Repeat the same process for the other doors that might have a bad seal.
• Step 6: Restore power to your refrigerator.

Power Failure

A Frigidaire fridge has a Power Failure alarm, which notifies you when power is lost. 

It’s a helpful reminder to take necessary action, especially if a power outage is expected to last more than four hours. You can prep the coolers and ice in case you’ll have to transfer the perishable goods.

Along with beeping noises, you’ll see a PF or Power Failure code on the display when there is an interruption. On select models, you can acknowledge the alarm once power is restored.

Solution: Check your user manual for detailed instructions specific to your Frigidaire fridge model.

Here are different ways to reset the PF alarm on Frigidaire refrigerators.

• Method 1: Click the Alarm Reset button to acknowledge the alarm once power is restored.
• Method 2: Press the Mute button to stop the beeping noises.
• Method 3: Tap the Default Settings button to reset the alarm.
• Method 4: Open the Options menu on the display and select the Power Failure alarm. Then, click on the Set button to confirm the alarm.

Jammed Ice Chute

Ice can get jammed into the dispenser’s chute, preventing the flap from opening all the way. If the chute stays jammed after a considerable amount of time, your Frigidaire refrigerator will sound the DI SP alarm. 

This alarm automatically turns off after two minutes. However, if you want to stop the beeping right away, you can manually mute the alarm.

Solution: To reset a Flapper alarm on a Frigidaire fridge, follow these steps:

• Step 1: Open the fridge door and inspect the dispenser chute for obstructions.
• Step 2: Remove the jammed ice cube by hand.
• Step 3: Press the Set key to reset the alarm.

High Temperature in the Fridge/Freezer

Your Frigidaire refrigerator sounds the High Temp alarm whenever its compartments’ internal temperatures get too high. If the fridge section reaches 55°F(12.78°C) or its freezer reaches 26°F(-3.33°C), it will trigger the alarm.

Additionally, you will see an H, Hi, or H1 error code on the display when your appliance is too warm. Although you can mute the beeping noise, the code won’t clear until you resolve the underlying issue.

Here are common causes of an H1 error.

• The fridge door was left ajar for a few hours.
• The door gaskets are dirty or damaged.
• The fridge section is overpacked and disorganized.
• The fridge/freezer thermistor is malfunctioning.

Solution: First, confirm that the door is closed or sealed properly. To mute the High Temp alarm on a Frigidaire fridge, push the Mute Alarm button until the beeping stops. 

You might have to wait for a while for the fridge to reach safe operating temperatures. If it is still warm after a considerable amount of time, you must identify the root cause of the cooling problem and fix it.

Here’s a quick guide on how to troubleshoot an H1 error code.

Causes	Solutions
Open Fridge Door	• Wipe the water droplets inside your refrigerator to prevent thick frost from accumulating. Close the fridge door properly.
Dirty Door Gaskets	• Mix 1:3 parts vinegar and water in a bowl. Dip the soft cloth or toothbrush in the mixture and use it to clean the dirty gasket.
Damaged Door Gaskets	• Take out the new door gasket and lay it out on a flat surface. • Leave it for 1-2 days to remove any creases and kinks. • Before installing the new gasket, unplug the refrigerator and open the door. • Pull out the rubber gasket on the door, starting from the top corner of the fridge.  • Work your way around the door until the seal is fully removed. • Position the new door seal over the shelving. Push the gasket into the channel and work your way around the door.  • Repeat the same process for the other doors that might have a bad seal. • Restore power to your refrigerator.
Inadequate Air Circulation	• Rearrange your fridge contents, placing the items in their designated shelves and bins.  • Locate the air vents in your unit and make sure they aren’t obstructed.
Faulty Fridge Thermistor	• Test your refrigerator’s thermistor for continuity. If it has none, a replacement is necessary. • Unplug your refrigerator. Open the fridge doors and pull out the deli drawer. • Remove the crisper drawers, the glass shelf, and the support rails. Detach the rest of the upper shelving. • Lift up the air duct cover and remove it. • Unthread the screws mounting the rear air duct. Then, remove the duct away from the liner. • Disconnect the wire on the thermistor to detach it from the duct. • Connect the wire to the new thermistor. Then, slip it into the housing behind the duct. • Mount the air duct on the liner and rethread its screws to secure it. After, reattach the cover. • Reinstall the upper shelving, the glass support rails, and the glass shelf insert to their original position. • Reinstall the crisper drawers and the deli drawer.
Faulty Freezer Thermistor	• Test your freezer’s thermistor for continuity. If it has none, replace it. • Unplug your refrigerator and open the freezer door. Unmount the freezer panel and set it aside. • Pull out the upper basket. Release the retaining clip on the rail and slide out the basket frame. • Release the retaining clips on the drawer. Then, remove the drawer assembly. • Unmount the thermistor housing and unplug the wire connector. • Remove the old thermistor. • Align the new thermistor on the housing and push it in until it locks into place. • Reconnect the wire and mount the housing. • Extend the slide rails and reattach the drawer assembly. Then, insert the retaining clips. • Reinstall the basket frame on the support rails. Pull the frame forward and reattach the basket. • Mount the freezer panel and rethread its screws. • Restore power to your fridge.

Quick Note: Read our repair guide and learn how to identify the root cause of the H1 error on your Frigidaire fridge. We offer easy-to-follow step-by-step instructions so you can troubleshoot the error yourself with confidence.

Frequently Asked Questions

---